Skip to content
Get a quote

Acrylic thermoforming and hot line bending

At Apligam we heat the plastic sheet to shape it over a mould or bend it to the exact angle. Thermoformed parts are stronger than bonded ones and have cleaner finishes.

Clear acrylic strip heat-bent into a wave shape

What thermoforming is

Thermoforming means heating a plastic sheet so that, when placed over a previously made mould, it takes on its shape. As well as forming over moulds, we bend with heat on our two thermoforming tables.

Acrylic is heat-formed at about 150-170 °C (extruded at 150-160 °C, cast at 160-170 °C); extruded acrylic responds better to this technique than cast.

Why thermoform

  • Greater strength: a part bent from a single sheet is stronger than one that is bonded.
  • Cleaner, more professional finishes, with no visible joints.
  • Fewer parts and less assembly: one-piece brochure holders or boxes, with no bonding.

Press brake for rigid materials

We also have a press brake for more rigid materials that allow this technique, such as polycarbonate. We bend to any angle.

What we make by thermoforming

  • Displays and stepped displays, such as the 3 mm clear acrylic thermoformed dummy displays made for CECOFAR and Botánica Nutrients.
  • One-piece brochure and card holders, with no bonding, which can be personalised with laser engraving or UV printing.
  • Hot-bent boxes, such as the 3 mm clear acrylic box measuring 275 × 275 × 130 mm made for Kubident.
  • Custom-bent cases, screens and guards.
  • Document holders folded back on themselves to form a «sandwich».

See examples under displays and dispensers and document and brochure holders.

Guides to help you choose

To choose the sheet, read cast vs extruded acrylic. Many folded pieces end up on a counter or at the point of sale: see our acrylic POS display ideas and, if they will be near food, is acrylic food safe?.

Request a quote

Tell us the dimensions, angles, thickness and quantity, or send us a sketch.

Work using this technique

Factory in Seville since 1970

Tell us about your project

From a one-off piece to large runs. Attach your drawing or sketch and we will prepare your quote.